Metos PROVENO E Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 72

Metos PROVENO E Скачать руководство пользователя страница 46

46

|

PROVENO E

Rev. 1.2 (24.08.2016)

Installation

5.1.5. Disposal of the package

In connection with unpacking, all packing material must be sorted and disposed of in accordance with
local recycling regulations.

5.2. Installation

Check before installation from the installation drawing that there is enough space behind the kettle for
tilting and servicing. Also check the location of the ﬂ oor drain.

The Proveno combi-kettle is designed for installation in a place with a ﬂ oor drain in front of the kettle.
The arrangement with a pouring channel and ﬂ oor drain behind the kettle is not suitable for use with the
combi-kettle

The combi-kettle can be installed in two different ways:

• On a subsurface installation frame, the frame cast into the ﬂ oor.

• On a surface installation frame, the frame ﬁ xed to the ﬂ oor surface.

For kettles size 200 - 400 l a subsurface frame installation is recommended.

Fixing the kettle directly to the ﬂ oor without frames is forbidden.

Either subsurface frames or surface frames must be in position before the installation of the combi-kettle
is started.

«
...
44
45
46
47
48
...
»

Содержание PROVENO E









































































Отзывы:

Нет отзывов