manualshive.com logo in svg

Metos PROVENO E, Инструкция по установке и эксплуатации, Страница: 16 / 72

Поделиться
Скачать
Metos PROVENO E Скачать руководство пользователя страница 16

16

 |

PROVENO E

Rev. 1.2 (24.08.2016)

Safety

1. Emergency/stop button
2. Mains switch
3. ON/OFF switch

•  Make sure before use that the removable lid is properly in place.

•  Make sure before use that the safety grid is properly in place.

• Always 

open the lid to its extreme position and check the lid’s secure before you bend down over the 

kettle.

•  Check the kettle’s safety valve at regular intervals in the way explained in this manual, and keep a 

record of regular checks.

2.3.4.  Changing the settings and adjustments

Only qualifi ed persons with suffi cient competence and expert knowledge of the appliance are allowed to 
change technical adjustments. The user can adjust some functions of the appliance to make them better 
suit their food production (see ”Setting customer specifi c parameters”). The service parameters can only 
be adjusted by a qualifi ed person having the required expert knowledge of the appliance.

2.3.5.  Safety instructions in the event of malfunction

In case of a serious emergency, all functions of the appliance must be stopped by pressing the emergen-
cy/stop button or by turning the mains switch to the OFF position. The functions become operable when 
the button is released by turning it to the right. In case the reason for using the emergency/stop switch 
is a serious malfunction jeopardizing safety at work, contact an authorized service provider immediately.

2.4.  Disposal of the appliance

When the appliance has reached the end of its useful life, it must be disposed of in compliance with the 
local rules and regulations. The best way of dealing with or recycling any substances which potentially 
have an adverse impact on the environment is to dispose of them through a proper waste company.

2.5.  Other prohibitions (dangerous methods and procedures)

Deliberate disregard of safety devices is prohibited, as it jeopardizes safe work in the kitchen. The ma-
nufacturer does not take responsibility for damage caused by deliberate use of a defective appliance, 
disregard of the safety precautions by modifying the designed operation of the appliance, or neglect of 
the technical condition, maintenance or service of the appliance.

3

2

1

Содержание PROVENO E









































































Отзывы:

Нет отзывов