Metos PROVENO E Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 72

Metos PROVENO E Скачать руководство пользователя страница 35

|

35

PROVENO E

Rev. 1.2 (24.08.2016)

Operation instructions

4.2.14. EasyRun 1.1 programming

EasyRun programming consists of 4 different programs,
Er1

a single step cooking program

Er2

a two step program where the steps can be either cooking – cooling or cooling cooking

Er3

a three step program where each step can be either a cooking or cooling

step

ClnP

an automatic cleaning aid program with preset kettle size dependent settings

In an Er program

cooking step

the following functions can be set,

• the cooking temperature

• HACCP on or off (selection applies to the whole program)

• EasyRun stirring on or off

• use CheckPoint yes or no

• starting time of the ﬁ rst step

• duration of the step

• amount of water to be ﬁ lled

In an Er program

cooling step

the following functions can be set,

• the cooling temperature

• HACCP on or off (selection applies to the whole program)

• Cool stirring on or off

• use CheckPoint yes or no

• duration of the step

A cooking step is changed into a cooling step by pressing

for about 2 seconds.

A cooling step is changed into a cooking step by pressing

for about 2 seconds.

An Er program can be set to start at a maximum after seven days by setting the start time weekday and time.

If the ﬁ rst step is a cooling step the start time must be more than the jacket drain time from the actual
time. The jacket drain time is 4 - 18 minutes depending of the kettle size. If the time between the actual
time and the starting time is shorter than the drain time the cooling step is ignored.

Setting a CheckPoint (CP) in a program step pauses the program until the user conﬁ rms continuation of
the program, extends the step duration or lowers the cooling temperature in a co oling step.

The following functions are possible when an EasyRun program is in operation:

power mixing

interrupting the mixing function

changing the step duration

stopping with the emergency/stop button.

«
...
33
34
35
36
37
...
»

Содержание PROVENO E









































































Отзывы:

Нет отзывов