Metos PROVENO E, Инструкция по установке и эксплуатации, Страница: 33 / 72

|
33
PROVENO E
Rev. 1.2 (24.08.2016) Operation instructions
Changing the target temperature during cooling
Press once.
Select a new target temperature (on the display: food temperature).
Cooling continues automatically until the new temperature has been reached.
Continuing the cooling to a lower temperature
When food temperature reaches the temperature set, the fl ow of cooling water stops, ‘rdy’ blinks on the
display and the buzzes sounds. The mixer continues rotating if this function has been selected.
Press once (buzzer stops sounding).
Select a new target temperature (on the display: food temperature).
The new target temperature is reached, ‘rdy’ is again blinking on the display and the buzzer sounds.
Maintaining the cooling temperature (‘Hold’)
The Proveno kettle can maintain the temperature reached.
Press once (buzzer stops sounding).
Food temperature is blinking on the display, but now a new temperature selection is not made.
The ‘Hold’ function is automatically activated and the kettle starts to maintain the reached temperature,
i.e. cooling continues when food temperature rises, but the buzzer does not sound.
Stopping the cooling
Press and keep pressed for about 2 seconds.
When the cooling is stopped, the kettle starts immediately automatic water emptying from the kettle’s
steam jacket. The display continuously shows the emptying time for the remaining water. During emp-
tying, all the kettle functions, except for tilting, are locked. You cannot cancel the stopping of cooling; the
emptying time must be allowed to come to an end.
If the kettle is tilted or the power is cut before the emptying time has expired, emptying will be inter-
rupted and it continues, when the kettle is reverted to an upright position or the power is connected.
After the emptying time, the kettle is ready for cooking (‘On’ is displayed).