Metos PROVENO E, Инструкция по установке и эксплуатации, Страница: 32 / 72

32
|
PROVENO E
Rev. 1.2 (24.08.2016) Operation instructions
Deactivating the activated/programmed operation time
Press and keep pressed for about 2 seconds.
In case the starting time has not yet been reached, the starting time has to be deactivated by pressing
the starting time button for about two seconds.
Activating the ”egg timer” function and changing the operation time
Press once and select
• In case none of the combi-kettle functions is activated, the clock functions as an entirely separate
clock, and the buzzer sounds after the set time.
• In case the heating is on, it continues for the set time. After that, the buzzer sounds and the combi-
kettle sets to automatic holding (see ”Activating the starting and cooking time”).
• In case the mixer function is on, the combi-kettle mixes for the set time, after which the buzzer
sounds and the mixer stops.
• In case both heating and mixing functions are on, both functions continue for the set time with the
set values, after which the buzzer sounds and the mixer stops. The heating remains at the set value
(if lower than the holding temperature) or keeps the automatic holding temperature (’HoLd’ on the
display).
Stopping the ”egg timer” function
Pres and keep pressed for about 2 seconds.
4.2.12. Automatic cooling
Cooling is based on cold tap water circulating in the kettle’s steam jacket. Mixing and use of scrapers
make the cooling more effi cient. The cooling time depends, for example, on the product and the amount
to be cooled, the product’s initial and end temperature, the fl ow rate and temperature of the cooling
water, as well as mixing operations.
Starting the cooling
Press once.
Select the target temperature for the product being cooled.
Wait three seconds until ’no’ is displayed. With the central dial, select ’ YeS’ on the display.
Start the cooling by pressing once.
‘Set’ is blinking on the display to remind you that mixing makes the cooling much more effective. Choose
a mixing operation suitable for the product and the load.
If ’no’ remains on the display for 10 seconds, i.e. the ’YeS’ selection is not made, the cooling function
is cancelled. If you, however, want to start cooling, activate the function by starting from the beginning.