Metos PROVENO E, Инструкция по установке и эксплуатации, Страница: 36 / 72

36
|
PROVENO E
Rev. 1.2 (24.08.2016) Operation instructions
Activating an EasyRun program
Press once.
Select the desired program Er1, Er2 or Er3 with the central dial.
Push the central dial.
Select the values you want for the fi rst step by fi rst pressing the button of the appropriate function and
setting the desired value with the central dial:
If desired a
programmed starting time for the fi rst step is set as follows:
Press for about 2 seconds until the button light goes on
Press once
Select the weekday
Push the central dial
Select the starting time
Push the central dial
Do not set a programmed start time if you want the program to start immediately when activated to run.
If the fi rst program step is a cooling program and the following step is a cooking step with a programmed
starting time the cooling will start immediately when the program is activated and the following cooking
step when the set start time is reached.
When programming an Er2 or Er3 program with more then one step the next step is selected as follows:
Press once
Select the next step
Push the central dial
Select the values you want for the next step in the same way as the fi rst one.
When the last program step is set the program is activated to run:
Press once
Select the value Strt