Metal-Fach Z589, Руководство по эксплуатации и техническому обслуживанию

Страница: 91 / 145

page 88
Z589
Round Baler
10.2.6 NET WRAPPER ACTUATOR (right-hand)
A linear electric actuator which governs the translation
of the net feeding arm both at the net feeding stage and
the following net cutting stage.
10.2.7 NET FEEDING ARM HOLD SENSOR
(right-hand)
This proximity switch sensor stops the net wrapping
actuator to make the required net winds.
10.2.8 NET COUNT SENSOR (right-hand)
The proximity switch sensor detect the number of
revolutions of the net spreading roller. The control
system converts the count signal into the metres of net
preset in the program and releases the actuator for the
next net cutting stage.
10.2.9 MAXIMUM CHAMBER FILL SENSOR
An active sensor which detects when the baling press
chamber is full.
10.2.10 BLADE ACTUATOR
(right-hand, Z589-2 only)
The linear electric actuator governs the extension and
withdrawal of the blades when the product is being cut.
10.2.11 BLADE EXTENDED SENSOR
(right-hand, Z589-2 only)
The proximity switch sensor indicates when the cutting
assembly is extended.