Metal-Fach Z589, Руководство по эксплуатации и техническому обслуживанию

Страница: 49 / 145

page 46
Z589
Round Baler
8.8 STOPPING THE MACHINE
IMPORTANT!
Do the following to finish your work:
• Stop the machine.
• Make sure that all moving components of the machine have come to a full stop and
are home.
• Stop the tractor, stop the engine and remove the ignition key.
• Turn off the F Bus system.
8.9 PARKING
CAUTION!
Before parking the machine at its storage site, make sure that there is no bale in the chamber.
Once your field work is finished, park the machine in a suitable storage location on a flat ground to prevent the
machine from accidentally rolling away.
• Chock the wheels or engage the parking brake, see Chapter 2.4 "Parking brake" (if the machine is equipped
with the parking brake).
• Rest the support on the ground and secure it with the safety pin.
Lift the machine 2÷3 cm over the tractor hitch to unhitch.
• Lift the PTO drive shaft support, uncouple the PTO drive shaft from the tractor and rest the shaft against the
support. Secure the PTO drive shaft with the safety chain.
Depressurize the hydraulic system:
•
Rest the pickup wheels on the ground.
•
Switch the pickup cut-off valve lever to CLOSED.
• Disconnect the hydraulic line and secure it on the cable support.
• Disconnect other hydraulic lines and secure them on the cable support.
• Disconnect the electrical power and lighting cables and secure them on the cable support.
• Disconnect the F Bus control cable line and secure it on the cable support.
• Remove the control terminal from the cabin and store it at a location sheltered from dust and weather.
• Remove the safety pin and the plug from the tow bar ring and
unhitch the machine.
• Drive away from the machine.