Metal-Fach Z589, Руководство по эксплуатации и техническому обслуживанию

Страница: 34 / 145

page 31
Z589
Round Baler
7.4.3 CONNECTING THE HYDRAULIC SYSTEM
Connect the hydraulic hoses as follows:
• Connect the small hydraulic line to the single-action DCV.
• Connect both large hydraulic hoses to the double-action DCV.
• The small hydraulic line of the pickup lift features a cut-off valve.
Before lifting the pickup:
• Switch the cut-off valve lever to OPEN , then lift the pickup (into the transport position).
•
Switch the cut-off valve lever to
CLOSED
to lock the pickup.
7.4.4 INSTALLING THE PTO DRIVE-SHAFT
The PTO drive shaft is a power transmission device with the CE certificate.
Each PTO drive shaft is supplied with its Operating and Maintenance Manual. Follow all PTO drive shaft operating
instructions and safety rules of that Manual.
Install the PTO drive shaft supplied with the machine
between the tractor PTO and the machine transmission
gearbox. The PTO drive shaft coupling style on the
tractor end is shown on the joint.
The PTO drive shaft length must not exceed the
minimum distance between the machine and the tractor
(to prevent the shaft from creeping), whereas the shaft
halves must engage one into the other at least at 1/3
of length at the maximum distance between the two
machines.
• Verify that the buttons and safety bolts are firmly
seated in the PTO attachment grooves and that the PTO drive shaft guard rotates freely; otherwise relubricate
the guard.
• Fasten the safety chain which prevents its rotation with the guard.
• See the PTO drive shaft Operating and Maintenance manual for more information about use and maintenance.
DANGER!
Recondition the safety guards on the joint after every servicing which has involved the PTO drive
shaft.
CLOSED
OPEN