page 99
Z589
Round Baler
•
Wrapping screen
Depending on the wrapping cycle settings input to the work program, the baler will start to wrap the bale in the
chamber.
IMPORTANT!
Each time EasyTronic is powered on, the default wrapping mode is Manual (the Hand icon).
Switching the Hand wrapping mode to Auto wrapping mode:
Method 1:
Use
+
,
-
,
R
and
L
to select the
Settings Menu
icon from the
Home
screen and confirm with
OK
.
Scroll the icons with
R
, select the
Machine
icon (here the Start Wrapping command
is shown as already selected) and confirm with
OK
.
•
Use
-
to select
Auto
and confirm with
OK
.
•
Press
CANC
to exit the menu.
Method 2:
Press
F2
in the
Work
menu to open the
Other
submenu (here the
Auto Wrapping
function is shown as already selected).
•
Confirm with
OK
.
If the wrapping is in the Manual mode, i.e. the display shows the
Hand
icon,
EasyTronic will prompt you to start the wrapping cycle manually.
•
Press
START
to start wrapping the bale.
If the wrapping is in the Auto mode, i.e. the display shows
AUTO
, the bale wrapping
stage will begin automatically once the bale is formed.
Quick change from the Manual to the Auto wrapping mode:
Work screen
--->>
F2
--->>
Auto Wrapping
--->>
OK
Содержание Z589
Страница 126: ...page 123 Z589 Round Baler 11 6 BELT RUNNING Note The arrows show the direction of belt movement...
Страница 130: ...page 127 Z589 Round Baler...
Страница 143: ...page 140 Z589 Round Baler Notes...
Страница 144: ...page 141 Z589 Round Baler...
