Metal-Fach Z589, Руководство по эксплуатации и техническому обслуживанию

Страница: 28 / 145

page 25
Z589
Round Baler
6.2 WORK CYCLE
The round baler performs the following work cycle steps:
1) Collect the plant material spread in rows on the ground
2) Press the material into cylindrical bodies (bales)
3) Wrap the bale
4) Release the bale
The product is carried into the baling chamber by the pickup and the handling assembly (a variable speed comb,
or a cutting assembly with a rotor and blades on the Z589-3 only). The product is compacted into round bales with
the belts which run on fixed and moving rollers.
The required bale size – from the minimum of 0.50 m to the maximum of 1.65 m – is produced by an automatic
net or cord wrapping system, controlled by the F Bus system.
The bale is then released by a hydraulic mechanism controlled by the tractor hydraulic power unit without
decoupling the PTO.
The baler permits various adjustment of the bale diameter and core density to the processed material and other
work requirements.
The mechanical adjustment facilitates rolling bales with soft or hard cores.