Metal-Fach Z589, Руководство по эксплуатации и техническому обслуживанию

Страница: 90 / 145

page 87
Z589
Round Baler
10.2 COMPONENTS
10.2.1 BALE DIAMETER SENSOR (right-hand)
It is a rotating potmeter coupled with the levers on the
belt tension main arm and relays the instantaneous
bale diameter value.
10.2.2 GATE CLOSURE SENSORS (BOTH SIDES)
Two active sensors, each on one side of the machine,
which monitor closure of the gate before and during
each work cycle.
10.2.3 PTO SENSOR
An active sensor which transmits the PTO RPM, which
is used to control the wrapping process.
10.2.4 CORD WRAPPER ACTUATOR
The cord wrapper is controlled by a linear electric
actuator with a position control potmeter.
10.2.5 CORD RUN SENSORS (right-hand)
Two proximity switch sensors, with one per pulley,
which monitor the cord run during the wrapping cycle
to warn of all faults.