merten MEG6260-0410, Руководство по установке

Страница: 46 / 127

- 46 -
U.motion KNX Server Plus, Touch
Installation Manual
5.5 S
ELECTIVE
I
MPORT OF AN
ETS P
ROJECT
It is possible to import only a part of the selected ETS project. In this case, you can select manually the group addresses
that should be imported into U.motion KNX Server Plus Touch. This can be an advantage in certain cases:
•
The project has already been imported in the past and now a version with new group addresses should be
imported, without the risk of losing the changes made to the old group addresses
•
Certain group addresses of the project should not be visible inside the visualisation
•
The amount of group addresses present in the ETS project breaks the limit of the supported group addresses of
the version of your U.motion KNX Server Plus Touch
In the last case, U.motion KNX Server Plus Touch will automatically enable the selective import; you will be able to import
only the amount of group addresses supported by your version (is shown on top of the page).
The following screenshot shows an example of the selective import:
The group addresses present in the ETS project are sorted after middle groups and are shown in ascending order,
together with their original ETS denomination. Through the checkboxes you are able to select / deselect single group
addresses. Furthermore, you can select / deselect entire middle groups through the checkbox beneath their title.
When changing the selection of group addresses, the total amount of selected group addresses is refreshed and shown
at the top of the page. If the amount surpasses the limit of the web server, the button for starting the import process will
be locked.
After having selected the desired group addresses, the import can be started by clicking on “NEXT”. At conclusion of the
import, the group addresses that have to be customized manually will be shown, as already explained more specifically in
the last chapters.
It can happen that the selective import can’t be concluded because some of the selected group addresses have relations
to other group addresses that haven’t been selected before (for example feedbacks, multiple relations of central functions
etc.) . In this case, the following message will be shown: