- 98 -
U.motion KNX Server Plus, Touch
Installation Manual
Further information can be found in the INTERCOM manual of U.motion KNX Server
Plus Touch.
If the EXPERT mode is enabled, the visibility of the CLIENT object can also be set to “true”, in order to distinguish it from
the non-used / unimportant CLIENT devices.
The CLIENT object can furthermore be used to trigger different actions in dependency of configurable events within the
software:
•
Execute a PAGE JUMP (either to a room of the VISUALISATION or to an external web page) on the selected
CLIENT device.
In order to configure those actions, please follow the steps below:
•
Drag the object that should be triggering the action (like for example a KNX object) into the section „PASSIVE
EVENTS“
•
Define the CONDITION for which the action should be executed (the selectable values depend on the type of
the connected object)
•
The action will automatically set to “REDIRECT” (PAGE JUMP).
In the column "VALUE" the following possibilities will be given:
•
Inserting the URL of an external web page (e.g. a homepage, web server contents, …)
•
Selecting a room of the VISUALISATION
In the first case it is sufficient to input the complete address into the text box; in the second case, the text-box can be, as
already seen with the CONDITIONS, transformed into a drop zone using the red button and therefore an arbitrary room
can be connected via drag & drop.
The screenshot on the next page shows a sample configuration, in which a PAGE JUMP of the CLIENT device with IP
address „192.168.0.47“ to the room „Temperature control“ should take place whenever the KNX object “Temperature
alarm” is in alarm state:
In order that the PAGE JUMP can be executed correctly, the concerned CLIENT device of course must show a
browser connected to U.motion KNX Server Plus Touch (or in the case of mobile devices, the connected app).
Otherwise, the PAGE JUMP is ignored.
