- 109 -
U.motion KNX Server Plus, Touch
Installation Manual
GRAPHS
SCALE FACTOR
Permits to define a scale factor through which the representation of the selected
graph can be adapted
Default: 1
UNIT
Permits to define a measuring unit, which is shown behind the energy values within
the graph
SHOW DATA IN GRAPH
If this option is selected, the data of the ENERGY COUNTER will be shown in graph
form, depending on the time period selected by the user (check out next chapter for
further details)
SHOW
COMPARISONS
IN
GRAPH
If this option is selected, in addition to the base graph also the calculated average
value, depending on the time period selected by the user, is shown
SHOW RANGE IN GRAPH
If this option is selected, in addition to the base graph also the range between
minimum and maximum value of the ENERGY COUNTER, always depending on the
time period selected by the user, is shown as colored area
The section “GRAPHS“ will only be visible if a sub-object of type POWER is connected to the ENERGY COUN-
TER. This will be explained more in detail in the next chapter.
All of these parameters can be overwritten by sub-objects that can be added to the ENERGY COUNTER. The parameters
of such an object therefore must not be of static nature, but can also be changed dynamically, for example through