- 94 -
U.motion KNX Server Plus, Touch
Installation Manual
If the RESET button is pressed, the calculated value shown in the INTEGRATOR will be set to zero and the time integral
will restart calculating from beginning.
The calculation does not take place in real time, but periodically and whenever a value change of the object
assigned to the INTEGRATOR is taking place. So if you want to check the function of an INTEGRATOR object,
change the value of the reference object that was assigned to the INTEGRATOR.
Integrator objects can also be used to trigger events in dependence of the calculated value. The objects that should be
controlled by such events can easily be inserted into the area "ACTIVE EVENTS".
11.6
N
OTIFICATIONS
NOTIFICATIONS are messages that U.motion KNX Server Plus Touch sends to one or more recipients, if the connected
events take place. There are two types of notifications:
ON-SCREEN NOTIFICATION
These notifications are shown inside the VISUALISATION in a special pop-up window.
MAIL NOTIFICATION
These notifications are sent to the configured recipients through the configured SMTP
server.
Depending on the notification type, you will see different settings. In the field "MESSAGE" the text must be entered,
which the corresponding NOTIFICATION should contain.
If you create a new NOTIFICATION, at least one object must be configured that triggers the sending of the NOTIFICA-
TION (active event in the configuration page of the corresponding object or passive event in the configuration page of
the NOTIFICATION); if a NOTIFICATION is not linked to any event, it will never be displayed or sent. An example for an
ON-SCREEN NOTIFICATION can be seen below: