background image

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS

Part Number

21101

21102

Module

Aurora Pro 12

Aurora Pro 25

Size, Folded (cm)

22.9 x 12.7 x 1.78

27.9 x 21.0 x 1.78

Size, Unfolded (cm)

74.9 x 45.7 x 0.07

105 x 54.6 x 0.07

Weight

400g

770g

Maximum Power

12 Watt

25 Watt

Nominal Voltage

12 Volt

12 Volt

Maximal Current

800 mA

1500 mA

Please read the following instructions before operating your Aurora Pro / Xpedition solar power panel.

Aurora Pro / Xpedition Instructions

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS

PRODUCT SPECIFICATIONS

Part Number

21210

21220

Module

Xpedition 30

Xpedition 62

Size, Folded (cm)

25.7 x 21.6 x 3.05

36.8 x 21.6 x 3.6

Size, Unfolded (cm)

113 x 54.6 x 3.05

133 x 76.2 x 0.25

Weight

830g

1450g

Maximum Power

30 Watt

62 Watt

Nominal Voltage

12 Volt

12 Volt

MPPT Voltage

18.8 Volt

20 Volt

Nominal Current

1500 mA

3100 mA

Open Circuit Voltage

28 Volts

28 Volt

Short Circuit Voltage

2.2 Amps

4.2 Amps

Aurora Pro / Xpedition converts sunlight directly into 12V 
electricity - ideal for recharging consumer electronics and 
maintaining vehicle batteries.

The overall performance of the solar charger is 
dependent on a variety of conditions including season, 
orientation with direct sunlight, cloudy conditions, 
temperature and shadowing. As a result, providing 
“typical” performance parameters is dependent on the 
placement of the solar charger.

Aurora Pro Contents List

• Aurora Pro solar panel
• Instructions
• 12V Cable Set

• 2.4m extension cable, 12V FCLA, 12V CLA, 

Battery Clamps, Barrel Connector

• 12V-5V USB adapter
• USB device adapter
• 8 Device Tips

• Mini-USB, Micro-USB, 2x Nokia, 2x Samsung, LG 

and Apple iPod Dock

Xpedition Contents List

• Xpedition solar panel
• Instructions
• 12V Cable Set

• 2.4m extension cable, 12V FCLA, 12V CLA, 

Battery Clamps, Barrel Connector

• Charge Controller

Care and Maintenance

Although the solar charger is flexible, ONLY FOLD the 
natural creases in the all-cloth portions of the panel.

Do not fold with solar cells facing outward.

Do not fold or crease the solar charger on sharp 
edges or objects.

Do not crumple or improperly bend panels

Do not excessively flex or bend the solar charger as 
this could cause the plastic layers to crease or 
bubble.

Do not machine wash, machine dry or dry clean the 
solar charger.

Do not attempt to recharge non-rechargeable 
batteries.

Do not attempt to open junction box or attempt to 
repairs of any kind on the solar charger, this will void 
the warranty.

How to use

Caution: Ensure that you completely understand this 
instruction manual before using the Aurora Pro solar 
panel.

1.Consumer Electronics

1.1. Handheld USB-Chargeable devices, i.e. cell 
phones, GPS, MP3-Players, USB AA/AAA/Li-Ion 
battery chargers, etc.

Recommended use: Use 5V USB adapter and device 
adapters to charge devices directly.

1.2. 12V Devices, i.e. Satellite phones, 12V AA/AAA/
Li-Ion battery chargers, BGAN Satellite Terminals, 
GPS, Radio, etc.

Recommended use: Use included FCLA adapter or 
barrel connector to charge devices directly.

        

CAUTION

: Care MUST be taken by the user 

connecting the Aurora Pro 25 and Xpedition to small 
electronic devices without the 5V USB adapter. The 
user must consult with the device manufacturer prior 
to connecting electronic devices to the Aurora Pro 25 / 
Xpedition directly to ensure that the device can be 
directly connected to a solar module with an open 
circuit voltage 

as high as 25 volts (Aurora Pro 25) 

and 28 Volts (Xpedition).

2.Vehicle Batteries

2.1. Application: Trickle charge and maintain car/RV/
marine batteries. Use charge controller.

Recommended use: Connect 12 V vehicle power plug 
to the 2.4m extension accessory cable and then to the 
Aurora Pro. Insert the 12 V vehicle power plug directly 
into your car

!

s cigarette lighter outlet. Place the solar 

charger so that it receives direct sunlight.
OR
Applied with care, battery accessory cable may also 
be used and attached directly to the battery from the 
to the Aurora Pro. It is the user

!

s responsibility to 

consult the battery manufacturer for the 
recommended charging method.

Troubleshooting

• Inspect the connections between Aurora Pro / 

Xpedition and the device you are attempting to 
charge.

• Inspect all plugs, outlets, clamps, connectors and 

cables to ensure they are not damaged.

• If the connections are all secure, use a volt meter or 

12V test light to check voltage between the positive 
and negative electrodes. This check should be done 
using the 12V vehicle power plug.

• For vehicle and AA/AAA charging, check to make 

sure that the battery is in good condition. Over time 
battery performance decreases. If the battery 
performance is weakened, the battery may need to 
be replaced. 

Note: Some portable electronics such as computers 
require more power (current) than the solar power 
produces. If problems persist you may require a larger 
solar panel.

FAQs

How do i know that my Aurora Pro / Xpedition solar panel 
is working?

Check the charge indicator light or bar on the handheld 
electronics or accessory. For battery charging, the 
product can be tested with a volt meter.

Will this product drain my battery at night?

No. The Aurora Pro has a built-in blocking diode that 
prevents the solar array from discharging your battery at 
night.

What happens if the Aurora Pro / Xpedition gets wet?

The Aurora Pro is made from rip-stop nylon, a water 
resistant material. Wipe the product dry with a clean, dry 
cloth and allow the product to dry before folding for 
storage. DO NOT keep the product in or underwater.

Can I leave the Aurora Pro / Xpedition solar panel outside 
for a continual use?

Yes, the Aurora Pro / Xpedition are designed for portable 
outdoor use. However, to prolong the life of the solar 
panel, we recommend once your application is finished 
charging, fold and store it when not in use.

Warranty

The 

Aurora Pro / Xpedition 

solar charger carries a 

two 

(2) year 

limited warranty against defects in workmanship 

and materials affecting performance. The manufacturer 
agrees to replace the defective product free of charge 
within the stated warranty period, when returned by the 
original purchaser with proof of purchase. This product is 
not guaranteed against wear or breakage due to misuse 
and/or abuse. In addition, any units that show signs of 
creasing or folding 

on 

the active photovoltaic areas are 

not covered under warranty. 

Note: 

Since the conditions or methods of operation, use 

and maintenance of solar chargers are beyond its control, 
the Manufacturer does not assume responsibility and 
expressly disclaims liability for loss, damage, or expense 
arising out of or in anyway connected with such 
operation, use or maintenance. 

         WARNING - Aurora Pro / Xpedition generates 
electricity when exposed to light, even when not 
connected in a circuit. Shocks and burns can result from 
contact with module output wiring, misuse, or improper 
connections. Contact battery manufacturer for questions 
on battery specifications before charging.

          The Aurora Pro / Xpedition will NOT work with 
indoor lighting. The photovoltaic process requires UV 
light, i.e. sunlight to perform. It is also recommended 
NOT to use the solar panel through a glass windows as 
glass is a natural filter of UV light and power output will be 
significantly decreased. 

These operating instructions represent the technical 
status at the time of printing. Changes in technology and 
equipment reserved. 

Euro-Line Solar GmbH

"

  www.me2solar.com

Содержание me2solar Aurora Pro

Страница 1: ...e power plug to the 2 4m extension accessory cable and then to the Aurora Pro Insert the 12 V vehicle power plug directly into your car s cigarette lighter outlet Place the solar charger so that it receives direct sunlight OR Applied with care battery accessory cable may also be used and attached directly to the battery from the to the Aurora Pro It is the user s responsibility to consult the batt...

Страница 2: ...Sie den 12 V KFZ Stecker mit dem 2 m Verlängerungskabel und dann mit dem Aurora Pro Stecken Sie den 12 V KFZ Stecker direkt in den Zigarettenanzünder Platzieren Sie das Solar Ladegerät so dass die Sonne möglichst senkrecht auf die Solarzellen scheint ODER Verbinden Sie das Kabel mit den Batterieklemmen mit dem 2m Verlängerungskabel und dann mit dem Solarpanel Verbinden Sie die Batterieklemmen dire...

Страница 3: ...r zorgvuldig aangebracht kan de batterijenkabel ook gebruikt en direct op de batterij van de zonnepaneel aangesloten worden Het is de verantwoordelijkheid van de g ebruiker om contact op te nemen met de fabrikant van de batterij met betrekking tot de aanbevolen laadmethode Problemen oplossing De aansluitingen tussen de Aurora Pro Xpedition en het toestel dat u wilt opladen controleren Alle stekker...

Страница 4: ...âble d alimentation à prise 12 V du véhicule dans la prise de l allume cigare Placez le chargeur solaire de façon à ce qu il reçoive directement la lumière du soleil OU Manipulé avec précaution le câble de batterie peut aussi être utilisé pour relier la batterie directement au chargeur Aurora Pro Xpedition Il est de la responsabilité de l utilisateur de consulter le fabricant de la batterie pour c...

Отзывы: