- 83 -
U.motion KNX Server Plus, Touch
Installation Manual
The WAIT COMMANDS can be found only through the search function, because they are directly integrated
inside the U.motion KNX Server Plus Touch software with the English name “wait”. If WAIT COMMANDS
should be filtered by time in the results of the search function, the time unit "sec", "min" or "hour" must be
added to the keyword “wait”, separated by a blank space.
Scenarios with built-in WAIT COMMANDS can be stopped after they once have been started; for this purpose the graphic
icon of the SCENARIOS includes a STOP-button. If this STOP-button is pressed, the SCENARIO is interrupted. The states of
the object contained in the SCENARIO, which were already changed when starting the SCENARIO, will not be restored,
just the further execution of the SCENARIO will be stopped.
Stopping a SCENARIO can also be triggered by an event, in dependence of the status change of another object (e.g. a
KNX object):