- 55 -
U.motion KNX Server Plus, Touch
Installation Manual
5.9
P
HYSICAL
A
DDRESS OF
U.
MOTION
KNX
S
ERVER
P
LUS
T
OUCH
Through the menu „CONFIGURE COMMUNICATION“ under „TECHNOLOGIES“ → „KNX“ you can change the physical
address of U.motion KNX Server Plus Touch, used for the communication with the KNX bus.
The address must be entered in the format X.Y.Z, respecting the limitations given by the KNX specification:
•
First number between 0 and 15
•
Second number between 0 and 15
•
Third number between 0 and 255
As distinct from the most KNX devices, which necessarily must use a physical address which corresponds to
the line they are installed, U.motion KNX Server Plus Touch is able to communicate with all devices of the
system, independently from its physical address. Therefore, modifying the physical address of the server has
merely the purpose to avoid conflicts with other devices and to keep a certain alignment with the KNX
system.
