- 91 -
U.motion KNX Server Plus, Touch
Installation Manual
Now a REFERENCE OBJECT for the condition must be defined. Typically an object of the software is used for this purpose,
that can be inserted into the corresponding field through drag&drop from the search engine.
When an object was draged into the red dashed drop zone, its name is shown inside.
Now the operator for the comparison of the condition must be defined. You can select between the following operators:
Condition operator
Comparison values
Minor
1
Minor or equal
Major
Major or equal
Equal
Condition operator
Comparison values
All values in the range, bounds included
2
All values in the range, bounds excluded
All values not in the range, bounds included
All values not in the range, bounds excluded
Depending on the selected condition operator, either one or two comparison fields will be shown in which the values for
the comparison must be entered. For each field it is possible:
•
Test input mode to assign a numeric value (please use the dot as separator for decimal values)
•
Or drop zone to drag another object into the field from the search engine
In this case the red button permits to switch between text input mode and drop zone.
In the second case the field will show the name of the object that has been dragged into the drop zone.
