- 32 -
U.motion KNX Server Plus, Touch
Installation Manual
3.7.3
T
OUCHSCREEN
Through the calibration the touchscreen can be optimized for the customer:
CALIBRATION
A single click on the button „CALIBRATE NOW“ starts the calibration procedure on the
display of U.motion KNX Server Plus Touch. During this procedure, 4 crosses appear
on the display of U.motion KNX Server Plus Touch, which must be pressed by the
customer one after another. Once all crosses have been pressed, the calibration
process is done.
The calibration process can be started only from the administration menu, which is accessible only by a
remote PC (desktop PC/ notebook). This permits to start the calibration even when the touchscreen can’t be
used anymore, e.g. because of a wrong calibration.