- 59 -
U.motion KNX Server Plus, Touch
Installation Manual
6
R
OOMS
6.1
I
NTRODUCTION
This chapter deals with the creation and customization of rooms, in which the various objects are grouped in the
VISUALISATION. Normally it is recommended to keep the structure of the rooms similar to the structure of the building
itself. It will be easier for the user to control the building through the VISUALISATION, when the navigation in the
VISUALISATION is the same as the user would have to do in the building for reaching a KNX device (light switch etc.).
Such a VISUALISATION can only be created when the rooms are structured inside the VISUALISATION at the same way
they are structured in the real building and when in each room all the object are located, which are also truly installed as
KNX devices in the real rooms of the building. This is only a recommendation; naturally the rooms can also be created
freely and filled with any kind of object / function desired.
6.2
C
REATE NEW
R
OOMS
In order to create a new room in U.motion KNX Server Plus Touch:
•
Access the ADMINISTRATION area
•
Select ”VISUALISATION“ → „ROOMS“
•
Click on the ADD-button in the toolbar at the bottom
The new room will be added to the sub-menu “ROOMS”. If an already existing room is selected when the ADD-button is
pressed, the new room will be added within the selected room; in this way also a tree-structure for navigation in the
VISUALISATION can be created (e.g. a room “1.floor” could contain other rooms like “kitchen” or “living room”; in the
VISUALISATION by accessing the room “1.floor” will be like accessing a sub-menu containing two other rooms “kitchen”
and “living room”).
