Mercury 115 Pro XS FourStroke Скачать руководство пользователя страница 15 | Manualshive

Страница: 15 / 159

Mercury 115 Pro XS FourStroke Скачать руководство пользователя страница 15

For additional information regarding events and circumstances covered by this

warranty, and those that are not, see the Warranty Coverage section of the

Operation and Maintenance Manual, incorporated by reference into this

warranty.

DISCLAIMERS AND LIMITATIONS
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. TO THE
EXTENT THAT THEY CANNOT BE DISCLAIMED, THE IMPLIED
WARRANTIES ARE LIMITED IN DURATION TO THE LIFE OF THE
EXPRESS WARRANTY. INCIDENTAL AND CONSEQUENTIAL DAMAGES
ARE EXCLUDED FROM COVERAGE UNDER THIS WARRANTY. SOME
STATES/COUNTRIES DO NOT ALLOW FOR THE DISCLAIMERS,
LIMITATIONS, AND EXCLUSIONS IDENTIFIED ABOVE, AS A RESULT,
THEY MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER LEGAL
RIGHTS WHICH VARY FROM STATE TO STATE AND COUNTRY TO
COUNTRY.

3 Year Limited Warranty Against Corrosion

WHAT IS COVERED:

Mercury Marine warrants that each new Mercury,

Mariner, Mercury Racing, Sport‑Jet, M

2

Jet Drive, Tracker by Mercury Marine

Outboard, Mercury MerCruiser Inboard or Sterndrive Engine (Product) will not

be rendered inoperative as a direct result of corrosion for the period of time

described below.

DURATION OF COVERAGE:

This limited corrosion warranty provides

coverage for three (3) years from either the date the product is first sold, or the

date on which the product is first put into service, whichever occurs first. The

repair or replacement of parts, or the performance of service under this

warranty, does not extend the life of this warranty beyond its original expiration

date. Unexpired warranty coverage can be transferred to subsequent

(noncommercial use) purchaser upon proper reregistration of the product.

CONDITIONS THAT MUST BE MET IN ORDER TO OBTAIN WARRANTY
COVERAGE:

Warranty coverage is available only to retail customers that

purchase from a Dealer authorized by Mercury Marine to distribute the product

in the country in which the sale occurred, and then only after the Mercury

Marine specified predelivery inspection process is completed and documented.

Warranty coverage becomes available upon proper registration of the product

by the authorized dealer. Corrosion prevention devices specified in the

Operation and Maintenance Manual must be in use on the boat, and routine

maintenance outlined in the Operation and Maintenance Manual must be timely

performed (including, without limitation, the replacement of sacrificial anodes,

use of specified lubricants, and touch‑up of nicks and scratches) in order to

maintain warranty coverage. Mercury Marine reserves the right to make

warranty coverage contingent upon proof of proper maintenance.

WARRANTY INFORMATION

eng

5

«
...
13
14
15
16
17
...
»

Содержание 115 Pro XS FourStroke
































































































































































Отзывы:

Нет отзывов