Mercedes-Benz Sprinter 2018, Руководство по эксплуатации

Страница: 76 / 420

#
To attach the covers of the mounting
shells: hold cover 3 such that retaining lug
1 is pointing towards rear seat anchorage
2 .
#
Insert cover 3 into rear seat anchorage 2
by pushing it downwards at an angle and then
clip it to the mounting shell.
#
After removing the rear bench seat, ensure
that the rear bench seat can stand securely
and do not tip over when in storage.
Installing the rear bench seat
Secure engagement of the rear bench seat is
guaranteed only if you keep the seat anchorages
clean and free of objects.
% In vehicles registered as passenger vehicles,
observe the maximum permitted number of
seats.
#
Remove the covers of the mounting shells as
described under "Removing the rear bench
seat".
#
Ensure that there are no objects in the seat
anchorages and mounting shells.
#
Position the bench seat behind the installa‐
tion position.
#
Hold the bench seat by the grab handles and
tilt it backwards.
#
Roll the bench seat forwards on the level
plastic carriers.
#
Ensure that the rear legs of the bench seat
are engaged.
#
Tilt the bench seat forwards firmly until the
locks on the front legs of the bench seat
engage audibly.
The locks on the front legs of the bench seat
will now be locked and the red indicator tabs
on the housing of release handle 1 should
no longer be visible.
%
If the red indicator tabs on the release handle
housing are visible, the bench seat is not cor‐
rectly engaged.
If the bench seat is not correctly engaged, you
can rectify this situation as follows:
#
Unlock the bench seat again and tilt it for‐
wards firmly until the locks on the bench seat
front legs engage audibly.
#
Attach the covers of the mounting shells as
described under "Removing the rear bench
seat".
Adjusting the seat backrest of the rear bench
seat
74
Seats and stowage