#
Take ratchet ring spanner
4
and auxiliary
tool
3
for the spare wheel lifter out of the
vehicle tool kit.
#
Push auxiliary tool
3
through opening
1
into the winch guide.
#
Place ratchet ring spanner
4
onto auxiliary
tool
3
for the spare wheel lifter so that the
letters "AB" are visible.
#
Turn ratchet ring spanner
4
in the direction
of arrow
2
until you feel resistance or until
the friction clutch of the winch overwinds.
#
Hook wheel wrench
8
into the loop of
extraction device
7
on the spare wheel and
pull the spare wheel out from under the vehi‐
cle.
#
Press spring
6
together on the wheel grip‐
per and release the wheel gripper from the
spare wheel.
#
Remove spare wheel extraction device
7
and store it in a safe place.
Check that the spare wheel is correctly and firmly
positioned:
R
after every wheel change
R
at every maintenance interval
R
at least once a year
Vehicles with front wheel drive: fitting the
spare wheel
%
Light-alloy wheels cannot be transported
under the vehicle. In this case, transport the
light-alloy wheel in the load compartment.
#
Take ratchet ring spanner
4
and auxiliary
tool
3
for the spare wheel lifter out of the
vehicle tool kit.
#
Push auxiliary tool
3
through opening
1
into the winch guide.
#
Secure extraction device
7
to the wheel.
#
Place the wheel on the ground with the wheel
brace pointing upwards.
#
Align the wheel so that the loop of extraction
device
7
points backwards.
#
Guide the wheel gripper at an angle on the
wire into the wheel brace.
#
Slide the wheel under the vehicle a little.
#
Place ratchet ring spanner
4
onto auxiliary
tool
3
for the spare wheel lifter so that the
letters "AUF" are visible.
#
Turn ratchet ring spanner
4
in the direction
of arrow
5
until you feel resistance or until
the friction clutch of the winch overwinds.
#
Pull wheel wrench
4
and auxiliary tool
3
for the spare wheel lifter out of the opening
for the winch and stow them in the vehicle
tool kit.
#
Close the rear-end doors.
Vehicles with rear wheel drive: removing the
spare wheel (panel van/crewbus)
Bolt covers for the safety hooks (example: panel
van)
#
Open the rear-end doors.
#
Place a screwdriver into recesses
2
and
then prise off covers
1
.
#
Using the wheel wrench from the vehicle tool
kit, unscrew the now visible bolts anti-clock‐
wise by approximately 20 turns.
#
Slightly raise spare wheel carrier
4
and
unhook left-hand safety hook
3
.
344 Wheels and tyres
Содержание Sprinter 2018
Страница 1: ...Sprinter Operating Instructions Mercedes Benz Sprinter Operating Instructions...
Страница 7: ......
Страница 9: ...Windscreen wipers 97 Rear window wiper 97 At a glance Cockpit 7...
Страница 22: ...CVehicles with rear wheel drive chock DSpare wheel example 342 20 At a glance Emergencies and breakdowns...