Mercedes-Benz Sprinter 2018, Руководство по эксплуатации

Страница: 95 / 420

1
High beam/daytime running lights housing
cover
2
Dipped beam/perimeter lights housing cover
3
Indicator socket
#
Switch off the lighting system.
#
High beam/daytime running lights: pull
back the housing cover 1 .
#
Turn the socket anti-clockwise and pull it out.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
the base of the bulb rests fully against the
base of the socket.
#
Insert the socket and turn it clockwise.
#
Attach the housing cover 1 .
#
Dipped beam/perimeter lights: pull back
the housing cover 2 .
#
Pull out the socket towards the rear.
#
Remove the bulb from the socket.
#
Insert the new bulb into the socket such that
the base of the bulb rests fully against the
base of the socket.
#
Align and insert the socket.
#
Attach the housing cover 2 .
#
Turn signal indicator: switch off the lighting
system.
#
Turn the socket 3 anti-clockwise and
remove it.
#
Gently turn the bulb anti-clockwise and take it
out of the socket.
#
Insert the new bulb into the socket and turn it
clockwise.
#
Insert the socket 3 and turn it clockwise.
Additional turn signal light
Requirements:
R
Additional turn signal light (all-wheel
drive vehicles): bulb type P 21 W
#
Switching off the lighting system.
#
Unscrew the screws 1 and remove the light
lens 2 .
#
Gently turn the bulb to the left and take it out
of the socket.
#
Insert the new bulb into the socket and turn it
to the right.
#
Place the light lens 2 in position and tighten
the screws 1 .
Replacing rear light bulbs (panel vans and
crewbuses)
Overview of rear bulb types (panel van and
crewbus)
You can change the following bulbs.
Light and vision
93