#
Remove breather hose
1
with the connector
bracket from the connection on the degassing
cover.
#
Unscrew bolts
2
of bracket
3
and pull the
bracket out upwards.
#
Slide the starter battery from its anchorage
across the direction of travel.
#
Fold the bars of the starter battery upwards
and lift the starter battery out of the battery
box.
Vehicles with front wheel drive: fitting the
starter battery
#
When reconnecting the starter battery,
observe the safety measures and protection
notes (
/
page 297).
#
Insert the starter battery into the battery box.
%
Take care that no wires are trapped.
#
Fold down the bars of the starter battery.
#
Slide the starter battery into its anchorage
across the direction of travel.
#
Insert bracket
3
.
#
Tighten screws
2
on bracket
3
which holds
the battery in place.
#
Attach breather hose
1
with the connector
bracket to the connection of the ventilation
cover.
#
Place the prefuse box on the battery.
#
Connect positive pole
A
and close cover
7
.
#
Place the wires on the support bolt.
#
Tighten the nuts for wires
6
with torque
specified on prefuse box
5
.
Mercedes-Benz recommends that you have the
starter battery replaced at a qualified specialist
workshop, e.g. a Mercedes-Benz Service Centre.
If you want to replace the starter battery yourself,
observe the following notes:
R
Always replace a defective starter battery
with a starter battery which meets the spe‐
cific requirements of the vehicle.
302 Breakdown assistance
Содержание Sprinter 2018
Страница 1: ...Sprinter Operating Instructions Mercedes Benz Sprinter Operating Instructions...
Страница 7: ......
Страница 9: ...Windscreen wipers 97 Rear window wiper 97 At a glance Cockpit 7...
Страница 22: ...CVehicles with rear wheel drive chock DSpare wheel example 342 20 At a glance Emergencies and breakdowns...