Mercedes-Benz Sprinter 2018, Руководство по эксплуатации

Страница: 97 / 420

#
To remove: loosen the screws 1 and pull
out the tail lamps in the direction of the
arrow.
#
Remove the connector from the bulb mount
3 .
#
Loosen the screws 2 and remove the bulb
mount 3 from the tail lamp.
#
Gently turn the bulb anti-clockwise and take it
out of the socket.
#
Insert the new bulb into the socket and turn it
clockwise.
#
To install: set the bulb mount 3 on the tail
lamp and screw in the screws 2 .
#
Press the connector into the bulb mount 3 .
#
Insert the tail lamp and screw in the screws
1 .
Licence plate lighting
Requirements:
R
Licence plate lighting: light bulb type W 5 W
#
Switch off the lighting system.
#
Place a screwdriver, for example, at the open‐
ing 2 between the lamp 3 and the panel
1 and carefully prise off the lamp 3 .
#
Remove the lamp 3 from the panel 1 .
#
Rotate the bulb holder by around 45° and
detach it from the lamp.
#
Remove the light bulb.
#
Insert the new bulb into the bulb holder.
#
Insert the bulb holder into the lamp and
rotate it by around 45°.
#
Insert the lamp into the panel opening until it
engages.
Replacing rear light bulbs (chassis)
Overview of rear bulb types (chassis)
You can change the following bulbs.
Vehicles with standard tail lamps
1
Clearance lamp: R 5 W
2
Tail light: R 5 W
3
Brake light: P 21 W
4
Indicators: PY 21 W
5
Reversing lights: P 21 W
6
Rear fog light (driver's side): P 21 W
7
Licence plate lighting: R 5 W
Replacing the tail lamps on the chassis
Requirements:
R
Rear fog lights: bulb type P 21 W
R
License plate lighting: bulb type R 5 W
R
Reversing lights: bulb type P 21 W
R
Turn signal indicators: bulb type PY 21 W
R
Clearance lamp: bulb type R 5 W
R
Brake light: bulb type P 21 W
R
Taillight: bulb type R 5 W
Light and vision
95