Mercedes-Benz Sprinter 2018, Руководство по эксплуатации

Страница: 55 / 420

Unlocking the electric sliding door manually
If there has been a malfunction or if the battery
has been disconnected, you can use release
catch 2 to disconnect the sliding door from the
electric motor. Then, you can open or close the
door manually.
% For further information on removing the
emergency key (
/
page 46)
#
Vehicles with complete sliding door trim:
remove the cover from release catch 2 .
Service operation is accessible.
#
To disconnect the sliding door from the
electric motor: insert the emergency key ele‐
ment into opening 1 of release catch 2 in
the "AUTO" position.
#
Turn the emergency key 180° clockwise. The
"MAN" position is set.
#
Open or close the sliding door with the out‐
side or inside door handle.
#
To connect the sliding door to the electric
motor: insert the emergency key element
into opening
1
of release catch
2
in the
"MAN" position.
#
Turn the emergency key 180° anti-clockwise.
The "AUTO" position is set.
#
Adjust the sliding door (
/
page 53).
If it is not possible to rectify the malfunction:
#
Visit a qualified specialist workshop.
Resetting the electric sliding door
Sliding door buttons on the centre console
Sliding door button on the door sill (B-pillar)
You must reset the sliding door if there has been
a malfunction or a voltage supply interruption.
#
If the sliding door is open: press button 1 or
2 on the centre console or sliding door but‐
ton 3 on the door sill (B-pillar) and hold until
the door is closed.
or
#
Close the sliding door with the door handle
(
/
page 52).
#
Then briefly press button 1 or 2 on the
centre console or sliding door button 3 on
the door sill (B-pillar) once, or pull the door
handle (
/
page 52) to completely open the
sliding door.
The sliding door is operational.
Opening and closing
53