Memjet Quadient Rena MACH 6, Руководство пользователя

Страница: 52 / 132

SECTION 3
OPERATING PRINTER
48
Ignore Exit Sensor feature Disabled
Ignore Exit Sensor feature Enabled
•
A larger Feed Gap value (mm) will increase the gap between pieces; which may be necessary in order to
reduce media feeding/printing issues.
NOTE : Whenever you start or resume a print job the printer must measure the media length to determine when
the feeder must be turned off/on, to obtain the selected Feed Gap value. Therefore you will notice that the first
few pieces feed with a larger gap before the selected Feed Gap value will take effect.
Ignore Exit Sensor - Printer is equipped with an Exit Sensor that is used to help detect Media feeding issues.
In certain conditions the Ignore Exit Sensor feature must be enabled (selected) or disabled (un-selected).
- Disable (circle turns black) the Ignore Exit Sensor option if the Media and media feed position,
meet all of the following points:
•
Media is positioned so the entire length of the Media is
passing over Exit Sensor.
•
Underside of the Media is white or light in color (reflective
to Exit Sensor).
•
Media doesn’t have any holes, cutouts or dark colors that
pass over Exit Sensor.
•
Exit Sensor is clean (functioning properly).
- Enable (circle turns green) the Ignore Exit Sensor option in the following cases:
•
Media is positioned so it does not pass over Exit Sensor.
•
Entire length of Media does not pass over Exit Sensor.
Feeding Media that is not square or not rectangular in
shape.
•
Underside of Media has dark colors that pass over Exit
Sensor.
•
Media has hole or cutout that passes over Exit Sensor.
•
Exit Sensor is dirty (not functioning properly)
Use the Exit Sensor Position symbol, on the “ Print Zone Reference Tool ”, to identify the position of the Exit
Sensor in relationship to where the media (Media Side Guides) are being positioned.
Print Zone Reference Tool is attached to the Feed
Table on the printer; near the sheet separation area.
If your Media doesn’t fully cover the Exit Sensor Position symbol; you must enable “Ignore Exit Sensor” feature.
See section titled “Print Zone Reference Tool” for more details on using this tool.
Exit Sensor
Position