APPENDIX
117
Removing and Cleaning Service Station Components
Removing & Cleaning Capping Station:
1.
Using the
Touchscreen
, select
“Menu,”
and tap
“Maintenance”
from the drop-down menu. Tap
“Inspect Sled”
. The Service Station Sled moves
out from under the Printhead Carriage.
2.
Open the Printhead Door.
3.
Press the Soft Power button to power-down the
printer. Then turn OFF the Main Power Switch.
4.
Gently release the tabs
[A]
(
one located at each
end
) securing the Assembly to the Service
Station Tray.
5.
Lift the Capping Station
[B]
out of the Printer.
NOTE:
Be careful, watch for dripping ink.
Do not lose the (2) inserts the Capping Station rests on (located behind the release tabs).
6.
Cleaning:
Remove ink and debris using a soft bristled brush while running Capping Station under tap
water. Then
wipe lip of cap
using distilled
water and a lint
free cloth.
7.
If you plan to
clean
additional
service Station Components continue to next item/section.
If not, reinstall the Capping Station into the Service Station Tray making sure that two inserts are present
and that the Capping Station locks fully into position.
8.
Close the Printhead Door.
9.
Turn ON the Main Power Switch.
10.
Press the Soft Power button to power-up the printer.
Содержание Quadient Rena MACH 6
Страница 1: ...Digital Color Inkjet Printer MACH 6 User Guide...
Страница 131: ......
Страница 132: ...2 1 2020 Quadient April 9 2020...
