Memjet Quadient Rena MACH 6, Руководство пользователя

Страница: 118 / 132

APPENDIX
114
Appendix F – Magnetic Media Support Assembly
The Magnetic Media Support Assembly (part # 47-116-25) is an optional accessory.
The Magnetic Media Support Assembly fits over the
Center Plate Support Bar. A strong magnet holds it
tight against the Center Plate. Allows feeding of
envelopes bottom edge first (
ie, flap is on the on
trailing edge ) to prevent the flap from opening,
catching or skewing the envelope. Helps prevent
misprints and media jams.
Use 1, 2 or more as needed for your print job.
NOTE : It is strongly recommended that the Assembly
be used in pairs.
Magnetic Media Support Assembly (47-116-25)
consists of one (1) of the items shown to the right.
If you need two, please order two (2).
Tools Needed :
None
To Install:
Place the Assembly between Feed Rollers and over the Center Plate Support Bar, as shown below.
Image above shows two (2) Assemblies
(one up-side-down and one right-side-up)
Image above shows two (2) Assemblies