Medoc TSA 2001, Техническое справочное руководство

Страница: 77 / 188

Q-Sense Technical Reference Manual
Proprietary 77 of 188
7.6.6 Chaining Programs
The purpose of the Chain Method is to chain several programs one after the other. The result is a
master program which runs the selected programs continuously, each program repeated by the
number of cycles defined and in order according to the indexed list.
For a method explanation, refer to section 2.7.6 , Page 32 .
As can be viewed in Figure 41 , a program list is present for the user to choose from, when
constructing the master program.
Each sub-program is defined by the following factors:
Table 19: Chain sub program parameters
Parameter Description
Probe The probe to be used in that specific sub-program.
Method The method to be used in that specific sub-program.
Program name A meaningful name for the specific sub-program.
Cycles The number of cycles to be executed in that specific sub-
test.
Figure 41: Program Chain Editor
The program menu varies according to the probe, and the method of stimuli intended for use, as
shown on the left side of the screen.
The parameters available for program creation at this stage are as follows:
Table 20: Program Details
Column Description
Program name
The program name (editable).