Medifab Shuttle Discovery Скачать руководство пользователя

Страница: 28 / 64

WARNING

Position the Shuttle Discovery and the Discovery

Seat forward-facing when used as a seat in a motor

vehicle.

WARNING

Transfer the user to the vehicle seat and use the

vehicle-manufacturer-installed restraint systems

whenever it is feasible. Store the unoccupied

Shuttle Discovery in the trunk or secure it in the

vehicle during travel.

WARNING

Use both pelvic and shoulder-belt restraints to

reduce the possibility of head and chest impacts

with vehicle components in the event of a vehicle

collision.

WARNING

Remove and secure the tray separately in the vehicle

to reduce the potential for injury to the user.

WARNING

Do not rely on postural supports for user restraint

in a moving vehicle. Refer to image and pelvic-belt

restraint use.

WARNING

Do not use the Shuttle Discovery following

involvement in any type of vehicle collision.

WARNING

Do not make any alterations or substitutions to the

Verve Stroller securement points or to the frame.

WARNING

Take care when applying the occupant restraint

to position the seatbelt buckle so that the release

button will not be in contact with the Discovery

Seat components during a crash.

WARNING

The maximum seat loading of 25 kg (55 lb) must

not be exceeded.

Warnings

Using Shuttle Discovery for transport in Motor Vehicles

Содержание Shuttle Discovery

































































Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды

Medifab Shuttle Discovery, Руководство пользователя

Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды