Medifab Shuttle Discovery Скачать руководство пользователя

Страница: 35 / 64

www.shuttlediscovery.com

Fitting the Jacket/Sternum harness

Feed each of the shoulder straps through the appropriate slots in the backrest

padding and the metal backrest

(A)

Secure the shoulder straps into the two cam lock buckles

(B)

situated on the

backrest.
Feed the lower straps through the side slots in the backrest into the cam lock

buckle

(C)

Securing the Jacket / Sternum Harness

Push the male buckle on the straps into the female parts of the buckles located

on the jacket. To release the buckle press the release clip/ button.

WARNINGS

1. Ensure the jacket is not impeding the throat causing a

choking hazard.

2. Beware of the user leaning forward or sliding down the

seat, this could potentially cause asphyxiation by the

jacket.

3. Always release the jacket from the shoulder straps first.
4. Ensure the jacket position and size is reviewed monthly

to ensure it is correctly fitted and appropriate for the

user.

5. Regularly check the jacket for wear and tear, especially

the stitching on the webbing.

Adjusting the Harness

The length of the shoulder straps can be adjusted by the two cam lock buckles

located on the back of the backrest

(C)

The length of the lower straps can be adjusted by the two cam lock buckles

located on the back of the backrest

(B)

Correct harness fitting is attained when the harness fits snugly to the user’s

body but the caregiver’s hands can be inserted between the shoulder and

straps.

Jacket/Sternum Harness

Содержание Shuttle Discovery

































































Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды

Medifab Shuttle Discovery, Руководство пользователя

Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды