Medifab Shuttle Discovery Скачать руководство пользователя

Страница: 53 / 64

www.shuttlediscovery.com

Adjusting the height

Never adjust the height of the Launcher Base with the user seated in the

Discovery Seat.
To adjust the height of the seat on the Launcher Base undo the 4 release levers

(A)

by a few turns. Pull the seat out of the angle slot and reposition the seat to

the required height and re-tighten the four release levers.
For ease of adjustment, we recommend that the height of the Launcher Base

should be adjusted without the Discovery Seat mounted on the base.

Removing the Discovery Seat

Release the red safety plungers by pulling the red knobs

(B)

Once the front of the seat is free, tilt the seat back and remove the seat from the

rear mounting bar.

WARNINGS

1. Ensure the seat is secure and locked in the angle slot before

placing the user into the seat.

2. Always lock the casters when the Launcher Base is in use.
3. Care must be taken at all times especially when the seating

is in the raised position.

WARNING

Before removing the Discovery Seat from the Launcher Base, the

casters must be locked.

WARNINGS

1. Always hold the Discovery Seat properly with both hands.

Otherwise the seat could fall and cause damage.

2. Never install or remove the Discovery Seat with the user

sitting in the seat.

Launcher Base

A-Frame Launcher Base (NZ & AU only)

To unfold the A-Frame Launcher Base, use both hands to squeeze the red

levers

(C)

, slide both down until the levers both re-engage. Ensure it cannot be

readjusted without squeezing the red levers

(C)

Never adjust the height of the A-Frame Launcher Base with the user seated in

the Discovery Seat. To adjust the height, use both hands to squeeze the red

levers

(D)

and slide to adjust height. Release levers and ensure both engage

and lock.
For the caregiver’s safety we recommend the caregiver kneel in front of the

Launcher Base and maintain a straight back while adjusting the seat height.
Please ensure all warnings on Pages 52 and 53 are read and understood prior to

using the A-Frame Launcher Base.

Содержание Shuttle Discovery

































































Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды

Medifab Shuttle Discovery, Руководство пользователя

Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды