Medifab Shuttle Discovery Скачать руководство пользователя

Страница: 40 / 64

IV Pole Mounting Assembly

Mount IV mounting assembly

(F)

to the Mounting Bracket

(A)

using the

M6 x 10mm countersunk screws. Loosen knob on IV mounting assembly

(F)

and slide the IV pole

(G)

into the bracket, secure at the desired

height by re-tightening the knob firmly by hand. Tighten countersunk screws firmly.

WARNINGS

Ensure all screws are tightened firmly.

Ensure the knob is tightened firmly to ensure the IV pole cannot slide.

Oxygen Bottle Holder Mounting Assembly

Mount Oxygen Bottle Holder

(H)

to the Mounting Bracket

(A)

using the M6 x 10mm

countersunk screws. Tighten countersunk screws firmly.

WARNINGS

Ensure all screws are tightened firmly.

Ensure the knob is tightened firmly to ensure the IV pole cannot slide.

IV Pole & Oxygen Bottle Holder Mounting Assembly

If both IV Pole and Oxygen Bottle Holder are to be mounted to the Verve Stroller, fix

the IV Pole mounting assembly behind the Oxygen Bottle Holder using the M6 x 15mm

countersunk screws, in place of the M6 x 10mm screws.

WARNINGS

Ensure all screws are tightened firmly.

Ensure the knob is tightened firmly to ensure the IV pole cannot slide.

IV and Oxygen Bottle Mounting

The mounting hardware can only be fitted on the left hand rear of the
driving direction on the Verve Stroller.
Both the IV Pole and Oxygen Bottle Holder require the Mounting

Bracket

(A)

to be fixed to the Verve Stroller.

Remove Qstraint peg

(B)

and M6 x 70mm cap screw

(C)

and replace

with M6 x 75mm cap screw

(D)

Loosely mount top hole in the bracket using 75mm cap screw

(D)

and

Qstraint peg

(B)

Mount lower end of the bracket using the inner and outer rear tie-down

clamps

(E)

and

(I)

respectively using the M6 x 35mm button head screw

on the front hole and M6 x 30mm on the rear holes.
Tighten all bolts/screws (including peg

(B)

) once mounted.

WARNINGS

Ensure all screws are tightened firmly.

IV Pole & Oxygen Bottle Holder

Содержание Shuttle Discovery

































































Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды

Medifab Shuttle Discovery, Руководство пользователя

Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды