Medifab Shuttle Discovery Скачать руководство пользователя

Страница: 62 / 64

The Shuttle Discovery system should be serviced annually once out of the

warranty period.
If you suspect the Shuttle Discovery has had heavy usage and is still under

warranty we recommend you request a full service.
Shuttle Discovery should only be serviced by a technically competent person/

health care provider who has been trained in the use of the product, a Medifab

authorised person or a local distributor.
Please contact Medifab customer services department or your local dealer for

further information.
Service Life: Medifab recommends that the Shuttle Discovery can be used for

a period of 4 years, provided the product is maintained and serviced as per

manufacturer’s instructions.

Product identification serial number

1. Discovery Seat:

Located on the backrest.

2. Verve Stroller:

Located on the inside of the stroller frame.

3. Launcher Base:

Located on the base.

4. Moon Rock Base:

Located on the inside face of the side.

5. Lunar Base:

Located on the side of the base.

Product raw material

1. Discovery Seat:

Aluminium & Plastic

2. Verve Stroller:

Aluminium & Plastic

3. Launcher Base:

Wood & Aluminium

4. Lunar Base:

Wood & Aluminium

5. Moon Rock Base:

Wood & Aluminium

6. Plastic Parts:

High Density Polyethylene

7. Cushion:

Polyurethane and EVA (Ethylene vinyl acetate) foams

8. Fabric:

Polyester and Nylon fabrics

Servicing & Technical Data

Example Product Identification Serial Label (for Seat)

Содержание Shuttle Discovery

































































Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды

Medifab Shuttle Discovery, Руководство пользователя

Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды