Medifab Shuttle Discovery Скачать руководство пользователя

Страница: 57 / 64

www.shuttlediscovery.com

Upholstery and Fabric covers

Day to Day cleaning

Padding should be wiped regularly with soapy water or antibacterial spray.

Please dry covering material thoroughly after wiping.

Deep cleaning

Fabric covers can be machine washed at 40°C (104°F) - or on

the warm water setting. Remove the foam from the covers

before washing the covers.
To remove thoracic support covers, undo the two screws

(A)

first and detach

the complete support. Remove the covers from the moulded foam. Store the

fasteners in a safe place and out of reach from children.

To remove the backrest cover, the shoulder straps need to be removed first. Lift

the cam lock buckle

(B)

at the rear of the backrest and pull the strap through

the padding.
The 5 point harness, pelvic straps, foot straps and sternum jacket can also be

machined washed at 40°C (104°F) or on the warm water setting. Ensure the

straps are refitted as instructed in this manual under the Accessories: 5 Point

Harness & Pelvic Straps section.
Store the plastic triglides (as shown in image at right) in a safe place

and out of reach from children.

Day to Day cleaning

Metalwork, plastic and wooden parts can be wiped with soapy water or

antibacterial spray. Please dry the product thoroughly. Do NOT use solvents,

abrasive cleaners, caustic soda, sodium hypochlorite and organic solvents.

Deep cleaning

For deep cleaning a low pressure steam cleaner can be also be used. We

recommend that the Verve Stroller wheels and Launcher Base casters are

cleaned on a 6-monthly basis.

Cleaning & Care Information

Metal, Plastic & Wooden components

Содержание Shuttle Discovery

































































Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды

Medifab Shuttle Discovery, Руководство пользователя

Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды