Medifab Shuttle Discovery Скачать руководство пользователя

Страница: 51 / 64

www.shuttlediscovery.com

Removing the Discovery Seat

Before removing the Discovery Seat from the Moon Rock Base, engage the anti-

rock mechanism.
Release the red safety plungers by pulling the two red knobs

(A)

. Once the front

of the seat is free, tilt the seat back and remove the seat from the rear mounting

bar.
Failure to follow these instructions and warnings could result in serious injury

or death to the user.

WARNINGS

1. Always use all of the positioning straps provided.
2. Always hold the Discovery Seat properly with both hands.

Otherwise the seat could fall and cause damage.

3. Never install or remove the Discovery Seat with the user

sitting in the seat.

4. Do not allow other individuals to use, play with, stand on,

ride on or run / play around the Moon Rock Base.

5. Allowing other children to play near the Moon Rock Base

may cause serious injuries due to the rocking motion of the

base.

6. Do not stand on the rear cross bars or aggressively rock the

Moon Rock Base, as this may cause the Moon Rock Base to

tip.

7. Always use the Moon Rock Base on an indoor level surface.
8. The tray is not designed to hold the user in the seat.

Moon Rock Base

Содержание Shuttle Discovery

































































Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды

Medifab Shuttle Discovery, Руководство пользователя

Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды