Medifab Shuttle Discovery Скачать руководство пользователя

Страница: 55 / 64

www.shuttlediscovery.com

Adjusting the height

To adjust the height of the Lunar Base, remove the outer screws

(A)

whilst

holding the T nuts

(B)

with the other hex allen key. Reposition the leg to the

desired height and retighten the screws into the T nuts

(B)

Removing the Discovery Seat

Release the red safety plungers by pulling the red knobs

(C)

. Once the front of

the seat is free, tilt the seat back and remove seat from the rear mounting bar.

WARNINGS

1. Never adjust the height of the Lunar Base with the user

seated in the Discovery Seat.

2. Ensure all four legs are level and secure before placing the

user into the Discovery Seat.

3. For the ease of adjustment we recommend that the height

of the Lunar Base is adjusted without the Discovery Seat

mounted on the Lunar Base.

WARNINGS

1. Always hold the Discovery Seat properly with both hands.

Otherwise the seat could fall and cause damage.

2. Never install or remove the Discovery Seat with the user

sitting in the seat.

Lunar Base

Содержание Shuttle Discovery

































































Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды

Medifab Shuttle Discovery, Руководство пользователя

Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Похожие инструкции для Shuttle Discovery

Бренды по названию

Популярные бренды