Medifab Shuttle Discovery Скачать руководство пользователя страница 21

Страница: 21 / 64

www.shuttlediscovery.com

Backrest height

Loosen the two knobs

(A)

by a few turns. Gently pull the inner backrest up by

the handle. Once the desired height has been reached tighten the two knobs.

Footplate height

Loosen the two screws

(B)

by a few turns with the hex allen key. Position the

footplate at the desired height and tighten the screws.
The lower footplate can be rotated upside down should you want to further

reduce the seat to footplate measurement.

Footplate Angle

Loosen the wing knob

(C)

by a few turns until the footplate is free. Position the

footplate at the desired angle and retighten the wing knob.

WARNINGS

1. Ensure the footplate is securely tightened at all times.

Should the footplate fail to provide support for the feet,

there is the possibility that the user may slide down the

seat causing asphyxiation by the pelvis straps, jacket or

the 5 point harness.

2. The footplate on the Discovery Seat is not designed to

take the user’s weight. Take extra care when transferring

the user into the seat. Do not stand on the foot plate.

3. Ensure the user’s feet do not get stuck behind the

footplate.

WARNINGS

1. Take care when angling the footplate as there could be

possible finger trap.

2. Do not stand on the foot plate.

WARNING

Ensure the knobs are tight after adjustment.

Setting up the Discovery Seat

Содержание Shuttle Discovery

































































Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Бренды по названию

Популярные бренды

Medifab Shuttle Discovery, Руководство пользователя

Результаты поиска

Содержание Shuttle Discovery

Отзывы:

Бренды по названию

Популярные бренды