52
Launcher Base
Before installing the Discovery Seat into the Launcher Base, lock the casters by
pressing the brake
(A)
down on each 4 corners.
WARNINGS
1. For safety reasons, the seat will only install one way into
the base. The notch
(D)
in the seat side engages into the
crossbar to ensure this.
2. Always use all of the positioning straps provided.
3. Always check that the two red safety plungers have engaged
and that the seat is secure before using the seat.
4. Be aware of the length of the base and the surrounding in
which the Launcher Base is being used.
5. Do not allow other individuals to use, play with, stand on,
ride on or run / play around the Launcher Base.
6. Always use the Launcher Base on an indoor level surface.
7. Always lock the 4 casters
(A)
when the Launcher Base is in
use.
Installing the Discovery Seat
Angle the rear of the Discovery Seat into the Launcher Base. Slide the rear slot
on the seat onto the rear mounting bar of the Launcher Base.
Press the front of the seat down onto the front mounting bar
(B)
of the Launcher
Base.
The two red safety plungers
(C)
should self-lock onto the front mounting bar.
A
B
C
D
Launcher Base