Constructing the Wigwam
A
A
A
A
A
A
A
A
B
B
B
B
B
B
B
B
128 cm
180 cm
128 cm
Wooden connector x 1
(with 4 poles attached)
Straight pole connector x 8
65˚
angle connector x 4
Pole A – length 64cm x 8
Pole B – length 90cm x 4
•
Lay out the poles separating A and B.
Divide the connectors as shown on the diagram.
•
Put the framework together as shown in the
diagram. It is essential to ensure all connectors
are pushed firmly onto each pole.
•
Pull the fabric over the frame work. It is
designed to be a tight fit. Make sure the top
of the roof is correctly in pl ace and then work
down to the base.
•
The velcro fastens around the base pole to
keep the fabric in place.
