MaxVision 8230 XRA2 series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 99

MaxVision 8230 XRA2 series Скачать руководство пользователя страница 8

2

MaxPac Dual/Triple-Screen 8230 XRA2/3-Series User Operation and Maintenance Guide

Documentation Conventions

Icons

The information icon is used to annotate important information.

The exclamation icon is used to annotate cautionary information.

Fonts

Italics

font is used for emphasis, book titles, commands, and path and file names.

Bold

may be used to emphasize text, highlight menu items, and denote the titles of dialog boxes.

Menu > Command

identifies the path used to select a menu command.

Courier

font is used for program listings and for any text messages that the software displays

on the screen.

Note:

describes important information, warnings, or unique commands.

“Select” means click the left mouse button on the indicated item.

“Click-left” (or just “click”) means click the left mouse button on the indicated item.

“Click-middle” means click the middle mouse button on the indicated item.

“Click-right” means click the right mouse button on the indicated item.

“Double-click” means click twice consecutively with the left mouse button.

“Drag-left” (or just “drag”) means press and hold the left mouse button on the indicated item, then
move the cursor (pointer) to the destination and release the button.

“Shift-click-left” means press and hold the <Shift> key then click the left mouse button on the
indicated item.

“Ctrl-click-left” means press and hold the <Ctrl> key then click the left mouse button on the
indicated item.

Inspecting the Shipment

MaxPac systems are packaged to withstand the roughest of treatment during shipping. Any boxes,
foam core padding, and anti-static bags should be stored safely away in case you need to ship the
system for any reason in the future. Inspect the box the system arrived in. If there is any unusual
damage to the box, make note of the damage on the delivery form and contact MaxVision support
(see

Appendix D for more details

).

«
...
6
7
8
9
10
...
»

Содержание 8230 XRA2 series




































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды