manualshive.com logo in svg

MaxVision 8230 XRA2 series, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
MaxVision 8230 XRA2 series Скачать руководство пользователя страница 21

 

MaxPac Dual/Triple-Screen 8230 XRA2/3-Series User Operation and Maintenance Guide 

 

15

Adjusting the Screens 

In the case of both dual- and triple-display configurations, each screen has a set of controls mounted 
on the top of the display (Figure 2-2). 
 

 

Figure 2-2. Top-down view of screen controls on dual- and triple-display systems 

 
Observe the power button located to the right of the power light-emitting diode (LED). This is an 
independent power button for the display/screen. 
 
Pressing the 

MENU

 button will bring up a series of items on the screen. Use the up/down buttons to 

move between these items; press and release the 

SEL

 button to select that item; and use the 

right/left buttons to vary the settings. 

Some custom configurations allow the display to be driven from multiple sources. In this case, 
pressing the 

INPUT

 button selects between digital and analog inputs. These custom configurations 

will come equipped with a special documentation addendum that details the actions of the 

INPUT

 

button; in the case of standard configurations, the source should always be set to “Digital.” 
 

 
Setting Up Video Input for Picture-in-Picture 

In the case of MaxPac 8230 XRA2 (dual-screen) systems, the right-hand monitor supports multiple 
inputs: the default DVI-I input from the system and an external VGA input that can be used for 
picture-in-picture monitoring purposes. In the case of MaxPac 8230 XRA3 (triple-screen) systems, 
both the left- and right-hand monitors support this capability.  

1)  Observe the VGA connector associated with the left-hand screen (Figure 2-3). The external video 

source would be fed into this connector as shown for the right-hand screen (Figure 2-4). 
 

Note:

 For the purposes of this example, the video signal being used as input to the right-hand 

screen originates from another PC. In reality, this input could come from any VGA video source 
with a resolution no higher than 1024 x 768. 

Содержание 8230 XRA2 series




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды