manualshive.com logo in svg

MaxVision 8230 XRA2 series, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
MaxVision 8230 XRA2 series Скачать руководство пользователя страница 13

 

MaxPac Dual/Triple-Screen 8230 XRA2/3-Series User Operation and Maintenance Guide 

 

7

 

Figure 1-14

 

 

Figure 1-15

 

3)  Now pull the left-hand edge of the right-hand screen away from the system (Figure 1-14). 

Continue to pull this screen until it is completely unfolded (Figure 1-15). 

Note:

 You may hear a squeaking noise when you unfold the second and third screens. This is caused by 

the polyurethane clutches and is part of the friction mechanism that holds the screens steady. Do NOT 
apply any lubricants to these mechanisms, because they may degrade the polyurethane. 

Tilting the System 

1)  Place one hand underneath the system and the other hand on top of the system (Figure 1-16). 

Press down lightly with the hand on top of the system while gently pulling the bottom of the 
system forward with your other hand. 

 

Figure 1-16 

 

Figure 1-17 

2)  Tilt the system back. While holding the top of the system with one hand, reach under the system 

with the other hand, grasp the bases of the two integrated support stands, squeeze the bases 
together, and pull the support stands down (Figure 1-17). 

Note:

 The stands are spring-loaded and will expand outward when you release them. The 

support stands can be set to various positions depending on the required viewing angle of the 
system/screens (the most extreme extended position is generally used only for maintenance 
purposes). 

Содержание 8230 XRA2 series




































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды