MaxPac Dual/Triple-Screen 8230 XRA2/3-Series User Operation and Maintenance Guide
9
Figure 1-22
Powering-Up Your MaxPac
1) Ensure that the main (hard) power switch – the switch located just to the right of the main power
input connector – is in its ON position (Figure 1-23).
Note:
When the unit is being moved or serviced, you should ensure that the main power switch
is in its OFF position.
Figure 1-23
Figure 1-24
2) Press and release the soft power switch located at the top of the system immediately behind the
center display screen (Figure 1-24)
3) Due to extensive system initialization and verification checks, the BIOS boot-up process can take
a significant amount of time, especially in the case of systems with large amounts of memory. In
the case of a system containing 8 GB of RAM, for example, it can take 45 seconds before all
three LEDs above the numerical keypad on the keyboard flash to indicate that the system is at a
point where information should start to appear on the main display.
Note:
Even if nothing appears on the main display, the fact that the three LEDs flash on the
keyboard indicate that the system is alive.
Содержание 8230 XRA2 series
Страница 6: ......
Страница 35: ...MaxPac Dual Triple Screen 8230 XRA2 3 Series User Operation and Maintenance Guide 29 Figure 2 39 Figure 2 40...
Страница 36: ...30 MaxPac Dual Triple Screen 8230 XRA2 3 Series User Operation and Maintenance Guide Figure 2 41 Figure 2 42...
Страница 90: ...84 MaxPac Dual Triple Screen 8230 XRA2 3 Series User Operation and Maintenance Guide Figure A 39 Figure A 40...
