Maxsine EP3 AC Series, Руководство пользователя

Страница: 54 / 246

Chapter 3 Front panel operation
44
Fn
number
functions explanation
Fn36 reset the encoder
Multi-turn
absolute encoder
is valid
The RESET command of encoder is used for encoder
initialization, encoder alarm reset and multi-turn information
return-to-zero. This function should be executed when the
battery is replaced.
3.6.2 Zeroing for analog quantity
Using this operation, the servo driver automatically examines analog zero-bias and writes in
the zero-bias value parameter P047 (or P054).This operation already preserved the zero-bias
parameter in the EEPROM, therefore did not need to carry out the parameter write operation
again.
Choose the analog zeroing " A-A0 " of the auxiliary function. Pressing the
5
button enters
the analog zeroing modes. First, use
8
and
2
button to select a function mode. Then pressing
down and hold the
5
button at least three seconds to active the operation mode. After finished
the operation and then pressing
4
button returns to the operation mode selection.