Maxsine EP3 AC Series, Руководство пользователя

Страница: 4 / 246

II
3. Operations
 Before operating the mechanical device, it is necessary to set the parameters with
appropriate values. Otherwise, can cause the mechanical device to out of control or break
down.
 Before running the mechanical device, make sure the emergency stop switch can work at
any time.
 Performing trial run without load, make sure that the servomotor is in normal operation.
Afterwards joins again the load.
 Please do not turn on and off the main power supply more frequently, otherwise can cause
the servo driver overheat.
4. Running
 Do not touch any moving parts of the mechanical device while the servomotor is running,
otherwise can cause personnel casualty.
 Do not touch servo driver and servomotor while the equipment is operating, otherwise can
result in an electric shock or in burn.
 Do not move any connection cables while the equipment is operating, otherwise can result
in physical injure or equipment damage.
5. Maintenance and inspection
 Do not touch any portion inside of the servo driver and servomotor, otherwise can cause
an electric shock.
 Do not remove the front cover of the servo driver while power is on, otherwise can cause
an electric shock.

Please wait at least 5 minutes after power has been removed before touching any terminal,
otherwise the remaining high voltage possibly can cause an electric shock
 Do not change the wiring while the power is on, otherwise can cause an electric shock.
 Do not disassemble the servomotor, otherwise can cause an electric shock.